The Best Airless Tire for a Lindsay 9500cc Custom Corner Irrigation System
Why should you use the EWRS-PIVOT airless irrigation tire on your Lindsay 9500cc custom corner irrigation system? There are actually 5 reasons. We at Evolution Wheel wanted to design a pivot tire that will solve all the problems farmers encounter with their irrigation tires, so we did.
5 Reasons Why You Should use an EWRS-PIVOT Airless Pivot Tire
- No Flats
- Increased Traction
- Increased Floatation
- Serviceability
- Cost-Effective
No Flats
Flats in the field are a headache. They cause all sorts of problems and need to be checked regularly to mitigate damage and downtime. The EWRS-PIVOT irrigation tire is an airless tire so it will never go flat. Using the EWRS-PIVOT tire means that you will never have flats again, minimizing downtime and saving you money.
Increased Flotation That Prevents Ruts
Floatation is extremely important if you want to combat deep rutting. Rutting is caused when a tire rides over the same spot continuously and pushes dirt to the side. Tires do this because they have a convex profile where the center of the tire is taller than the sides.
The EWRS-PIVOT has a concave profile meaning that the edges of the tire are taller and they slope inwards. This allows the EWRS-PIVOT irrigation tire to hold mud underneath the tire instead of pushing it out. Resulting in significantly less rutting.
Increased Traction
Many airless irrigation tires don't have great traction due to them being inflexible. Flexibility in a tire allows it to wrap around obstacles instead of slipping. The EWRS-PIVOT is designed to flex similar to a pneumatic tire through the use of its core geometry.
The core geometry refers to the apertures in the rubber segments that compress are designed to compress completely when pressure is applied. This compression also allows the tire to be self-cleaning by pushing all the material that is inside out.
Serviceability
The EWRS-PIVOT is made with rubber segments that bolt onto the high-strength steel rim. With a rim that will last decades all you need to do when the rubber wears out is purchase a new set of rubber segments, then replace them right in the field with only a wrench.
With that being said, the EWRS-PIVOT is built with UV protection and will last 2-3 times the lifespan of a premium pneumatic pivot tire.
Cost-Effective
When you sum up the added expenses of flat tires, gearbox damage, labor, and downtime costs, pneumatic tires get expensive. When using the EWRS-PIVOT airless irrigation tire, you don’t have to worry about all the extra maintenance and costs associated with it. Providing you with a cost-effective tire solution for your Lindsay 9500cc custom corner irrigation system.
EWRS-PIVOT SERIES
The EWRS-PIVOT series of airless pivot tires from Evolution Wheel offers the most advanced airless technology to the irrigation market. This solution delivers serviceability, traction, and floatation into one impressive offering.
Our tread design and tire profile offer greater traction through mud and obstacles. The unique concave contact face helps eliminate rutting by keeping dirt under the tire, where it belongs. The face of the tire is pointed inwards. Compared to typical pneumatic irrigation tires which convex shape push mud out from under the tire, causing ruts.
Our proprietary segmented design bolts onto our high strength wheel, allowing you the ability to service the tire quickly, eliminating the need to change a tire in the field.
Unlike other airless pivot tires, the EWRS-PIVOT compresses flat pushing material out, it's a self-cleaning system. The compressed cores elongate the footprint of the tire allowing it to wrap over obstacles increasing traction and reducing ground pressure.
Related Pages
If this page was informative, check these out:
