Pivot Tracks on Your Reinke Irrigation System?
Is your Reinke center pivot irrigation system creating deep ruts in your field? At Evolution Wheel we understand how much blood, sweat, and tears go into maintaining the tires on any irrigation system, so we have developed a tire to fix all your problems.
Pivot Tracks
Pivot tracks, or ruts, are one of the most common issues with pneumatic pivot tires. These tracks are caused when continuous travel occurs over the same path, creating a cavern. This causes soil and crop damage, additional damage to tires, and system stoppages due to getting stuck. There are a few different solutions farmers have come up with to fix the problem with rutting but nothing that addresses the actual cause of ruts. The tires.
The EWRS-PIVOT Airless Pivot Tire
The EWRS-PIVOT airless center pivot irrigation tire solves all these issues. It is engineered specifically to mimic a pneumatic pivot tires compression, a wide true to spec 14.9” x 24” profile to increase traction, and a concave profile that increases floatation while preventing rutting.
The EWRS-PIVOT has a unique core hole geometry that compresses completely when pressure is applied. This allows the tire to compress like a pneumatic mimicking its traction as well as being self-cleaning, so you don’t have to worry about added weight to the system.
The concaved true to spec 14.9” X 24” profile keeps mud underneath the tire, spreads the weight over an increased surface area, and the aggressive tire tread pattern increases overall floatation and traction.
The EWRS-PIVOT’s high-quality rubber has UV protection, and the rims are made with high-strength steel that will last a lifetime. It is also a segmented tire. Each segment is bolted onto the rim so all you need is a 3/4" socket to service the tire when it’s damaged. The rubber on our tires will last 2-3 times the life span of your traditional pneumatic irrigation tires, without the risk of going flat.
The EWRS-PIVOT airless center pivot irrigation tire is engineered to solve the problems that farmers face when it comes to irrigation systems while not creating new ones. The unique design is a cost-effective long-lasting solution allowing you to trust that your equipment won't fail on you.
EWRS-PIVOT SERIES
The EWRS-PIVOT series of airless pivot tires from Evolution Wheel offers the most advanced airless technology to the irrigation market. This solution delivers serviceability, traction, and floatation into one impressive offering.
Our tread design and tire profile offer greater traction through mud and obstacles. The unique concave contact face helps eliminate rutting by keeping dirt under the tire, where it belongs. The face of the tire is pointed inwards. Compared to typical pneumatic irrigation tires which convex shape push mud out from under the tire, causing ruts.
Our proprietary segmented design bolts onto our high strength wheel, allowing you the ability to service the tire quickly, eliminating the need to change a tire in the field.
Unlike other airless pivot tires, the EWRS-PIVOT compresses flat pushing material out, it's a self-cleaning system. The compressed cores elongate the footprint of the tire allowing it to wrap over obstacles increasing traction and reducing ground pressure.
Related Pages
If this page was informative, check these out:
