Protect Your Soil and Crops by Preventing Ruts

 

Cause of Soil Damage

Rutting from pneumatic tires can cause soil damage. Continuous traffic on wet soil will compact and smear the soil within the ruts, along with heaving soil up on the side. This prevents the water from seeping through the soil affecting the efficiency of the center pivot system, crop yields, and creates problems when traveling over them when harvest comes.

Evolution Wheel’s Solution

There are many different solutions to prevent rutting however they don’t eliminate the problem itself. At Evolution Wheel we believe in tackling the problem at the source, the tires.

Pneumatic pivot tires have a rounded shape that digs into the ground to create traction. This pushes soil outwards and with the combination of wet soil and continuous traffic over the same route, causes rutting.

The EWRS-PIVOT irrigation tire is engineered to hold soil underneath the tire to prevent rutting. It achieves this with a concave profile and bi-directional tread along with a wide footprint. The concave profile and bi-directional tread hold the soil underneath the tire and the wide footprint distributes the weight across the footprint, which minimizes the issue of deep rutting.

Along with the anti-rutting design, the EWRS-PIVOT is an airless irrigation tire. Being an airless tire, there is no possibility of flat tires which takes time and money to fix. The EWRS-PIVOT is also built with rubber segments that bolt to the wheel. This makes it possible to service the tire right in the field. If a segment is damaged, you can remove that segment and replace it with a new one. Which is much cheaper and faster than having to replace a pneumatic irrigation tire when one gets damaged. No tire shop is needed.

tooltip-1 tooltip-2 tooltip-3 tooltip-4 tooltip-5 tooltip-6
patent pending
Play button airless center pivot irrigation tires
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

EWRS-PIVOT SERIES

The EWRS-PIVOT series of airless pivot tires from Evolution Wheel offers the most advanced airless technology to the irrigation market. This solution delivers serviceability, traction, and floatation into one impressive offering.

Our tread design and tire profile offer greater traction through mud and obstacles. The unique concave contact face helps eliminate rutting by keeping dirt under the tire, where it belongs. The face of the tire is pointed inwards. Compared to typical pneumatic irrigation tires which convex shape push mud out from under the tire, causing ruts.

Our proprietary segmented design bolts onto our high strength wheel, allowing you the ability to service the tire quickly, eliminating the need to change a tire in the field.

Unlike other airless pivot tires, the EWRS-PIVOT compresses flat pushing material out, it's a self-cleaning system. The compressed cores elongate the footprint of the tire allowing it to wrap over obstacles increasing traction and reducing ground pressure.