The Best Airless Pivot Tire for a Reinke A-80g Pivot System
Why should you use the EWRS-PIVOT airless irrigation tire on your Reinke A-80g pivot system? There are actually 5 reasons. We at Evolution Wheel wanted to design a pivot tire that will solve all the problems farmers encounter with their irrigation tires, so we did.
5 Reasons Why You Should use an EWRS-PIVOT Airless Pivot Tire
- No Flats
- Increased Traction
- Increased Floatation
- Serviceability
- Cost-Effective
No Flats
The EWRS-PIVOT irrigation tire is an airless tire which means it'll never go flat. A flat irrigation tire will cause all sorts of problems in the field. They can fill with mud and weigh down the system, they get stuck, and can damage the gearbox as well. The downtime that flats cause on your Valley pivot irrigation system costs time and money to fix. Using a no-flat tire like the EWRS-PIVOT irrigation tire means that you will never have to worry about flats out in the field ever again.
Increased Flotation
Deep rutting is a huge problem for many irrigation farmers. Ultimately these are caused by tires with poor floatation. The EWRS-PIVOT has the best floatation in the industry. The irrigation tire incorporates a bi-directional tread pattern with a concave profile to maximize floatation. The bi-directional tread doesn't dig the tire down and the concave profile keeps the mud underneath the tire. Where it belongs.
Increased Traction
Even though the EWRS-PIVOT is an airless tire, it is designed to compress as a pneumatic would. Its unique core geometry compresses completely allowing the tire to flex and also push material out of the core holes making it a self-cleaning system. This along with its aggressive bi-directional tread design maximizes traction.
Serviceability
Serviceability in a tire is highly important. The EWRS-PIVOT is made with rubber segments that bolt onto the steel rim. If a segment is damaged, all you need to do is replace that specific segment which can be done with a 3/4" inch wrench.
The rubber has UV protection elements built into the rubber and will last 2-3 times longer than a pneumatic tire. So even though the tire is serviceable the tire is built to last.
Cost-Effective
When you sum up the added expenses of flat tires, gearbox damage, labor, and downtime costs, pneumatic tires get expensive. When using the EWRS-PIVOT airless irrigation tire, you don’t have to worry about all the extra maintenance and costs associated with it. Providing you with a cost-effective tire solution for your Reinke A-80g pivot system.
EWRS-PIVOT SERIES
The EWRS-PIVOT series of airless pivot tires from Evolution Wheel offers the most advanced airless technology to the irrigation market. This solution delivers serviceability, traction, and floatation into one impressive offering.
Our tread design and tire profile offer greater traction through mud and obstacles. The unique concave contact face helps eliminate rutting by keeping dirt under the tire, where it belongs. The face of the tire is pointed inwards. Compared to typical pneumatic irrigation tires which convex shape push mud out from under the tire, causing ruts.
Our proprietary segmented design bolts onto our high strength wheel, allowing you the ability to service the tire quickly, eliminating the need to change a tire in the field.
Unlike other airless pivot tires, the EWRS-PIVOT compresses flat pushing material out, it's a self-cleaning system. The compressed cores elongate the footprint of the tire allowing it to wrap over obstacles increasing traction and reducing ground pressure.
Related Pages
If this page was informative, check these out:
