The Best No Flat Tires for Pivot Irrigation
The EWRS-PIVOT series airless center pivot irrigation tire will never go flat. On top of that, it is also designed to prevent ruts, minimize stress on your gearbox, and has superior traction. With all these attributes considered, this tire will fix your pivot tire problems without creating new ones.
If you don’t find a flat on your field sprinkler system fast enough the tire is likely to be destroyed beyond repair. It may even cause damage to the rim or the tower costing you time, energy, and money. This is unacceptable. However, many farmers are afraid to go to an airless option because of the poor traction and low flexibility which causes gearbox wear. The EWRS-PIVOT fixes these issues.
The EWRS-PIVOT series is an airless irrigation tire which means that the tire can’t go flat. Instead, the tire uses unique core geometry where the core holes within the rubber compress completely to mimic a pneumatic tire. This is important to minimize stress on the gearbox as well as increase overall traction. The rubber is also made to stand up to the harsh conditions of irrigation farming allowing it to last 2-3 times more than a pneumatic in your field.
The EWRS-PIVOT series is an airless field sprinkler irrigation tire
The EWRS-PIVOT airless field sprinkler irrigation tire solves all these issues. It is engineered specifically to mimic a pneumatic irrigation tires compression, a wide true-to-spec 14.9” x 24” profile to increase traction, and a concave profile that increases floatation while preventing rutting.
The EWRS-PIVOT has a unique core hole geometry that compresses completely when pressure is applied. This allows the tire to compress like a pneumatic mimicking its traction as well as being self-cleaning, so you don’t have to worry about added weight to the system.
The concaved true to spec 14.9” X 24” profile keeps mud underneath the tire, spreads the weight over an increased surface area, and the aggressive tire tread pattern increases overall floatation and traction.
The EWRS-PIVOT’s high-quality rubber has UV protection, and the rims are made with high-strength steel that will last a lifetime. It is also a segmented tire. Each segment is attached to the rim with ¾” nuts. This allows you to service the tire and easily replace a segment when it’s damaged. The rubber on our tires will last 2-3 times the life span of your traditional pneumatic irrigation tires, without the risk of going flat.
The EWRS-PIVOT airless field sprinkler irrigation tire is engineered to solve the problems that farmers face when it comes to field sprinklers while not creating new ones. The unique design is a cost-effective problem-solving solution allowing you to trust your irrigation tires not to fail on you.
EWRS-PIVOT SERIES
The EWRS-PIVOT series of airless pivot tires from Evolution Wheel offers the most advanced airless technology to the irrigation market. This solution delivers serviceability, traction, and floatation into one impressive offering.
Our tread design and tire profile offer greater traction through mud and obstacles. The unique concave contact face helps eliminate rutting by keeping dirt under the tire, where it belongs. The face of the tire is pointed inwards. Compared to typical pneumatic irrigation tires which convex shape push mud out from under the tire, causing ruts.
Our proprietary segmented design bolts onto our high strength wheel, allowing you the ability to service the tire quickly, eliminating the need to change a tire in the field.
Unlike other airless pivot tires, the EWRS-PIVOT compresses flat pushing material out, it's a self-cleaning system. The compressed cores elongate the footprint of the tire allowing it to wrap over obstacles increasing traction and reducing ground pressure.
Related Pages
If this page was informative, check these out:
